V1 from ULTRAKILL 3d model

A miniature of V1 sculpted, modeled and pre-supported for 3d printing by myself.

If you like the model feel free to drop a like on this page or follow me at: https://twitter.com/AuthoredEntropy

Printing instructions:

All models provided are pre supported, as such for printing itself just slice and print the model. The tricky bit with this model is removing the supports, the neck and limbs are quick small as to maintain proper proportions as such using flush cutters to remove supports is a necessity as the model will likely break if removing supports with bare hands, additionally remove the supports around the head last, they are put there as to make the neck more durable and less fragile while removing the rest of the supports, once you do get to removing supports from the head use extreme caution, support the head with your fingers while using the flush cutters to remove supports, other than this NEVER touch the head of the model, the neck is small and fragile and will snap unless you are using a tougher resin then basic cheep resin.

For best results print the stand in a transparent resin as to give the illusion of floating.

V1 is from the indie game ULTRAKILL by hakita (find him here: https://twitter.com/HakitaDev, and find his game here: https://store.steampowered.com/app/1229490/ULTRAKILL/)

All pre-supported files have been tested and printed on the anycubic photon mono.

Please note that the base/stand of this model does not need supports to be printed and will print entirely fine without them.

All files are designed to be printed on a resin printer, and all print instructions are meant for resin printers, files are supported with tree supports which (with caution) can be printed on FDM, but is rather difficult to get a clean print with on FDM.

Under this license you may ONLY use this model for personal purposes and may not resell or use this model in any commercial way.